Description
AGGLam® Energy introduces a pyrolytic “hardcoat” LowE into the laminate make up – ComfortPlus™, offering the best Insulation for a single glazed glass product (lowest U-Value) as well as having the benefits that laminated glass offers. These consist of 2 pieces of glass, one being the LowE, manufactured as one unit with a middle PVB interlayer that acts as a strong adhesion against penetration, remaining in place and safe if the glass breaks.
With a clear interlayer and using ComfortPlus™ Clear, high Clarity allows a clear view through the glass and high Visible Light Transmittance (VLT) that optimises natural light entering inside and filling your space. When Glare control, a Coloured aesthetic and/or more Solar Control is needed (lower SHGC), there is ComfortPlus™ Neutral.
AGGLam® Energy is also:
- Safe – Grade A Safety – certified to AS/NZS 2208
- Secure – Strong against breakage and penetration
- Quiet – Advanced acoustic performance compared to regular float glass
- Protects – Over 99% UV protection to reduce colour fading factors
Note that being a Hardcoat LowE coating, there is the possibility for a haze appearance in the glass – see Haze document here for more information.
™
ComfortPlus™ is a trade mark of Oceania Glass Pty Ltd.
How to Specify
Prefix:
ComfortPlus™
Colour:
Clr (Clear), Neut (Neutral)
Make up:
eg. 6.38mm
Example short name:
ComfortPlus™ Clr – 6.38mm
Example long name:
AGGLam®
– 6.38mm ComfortPlus™ Clear Laminate
Glass thickness available:
6.38mm
Minimum size:
100mm x 100mm
Maximum size:
4400mm x 3210mm
Other sizes available upon request, including custom made laminates that can use multiple glass options and also be heat treated.
Full Engineer design and sign-off available if required.
™
ComfortPlus™ is a trade mark of Oceania Glass Pty Ltd.
Note the required adherence to AS standard maximum size allowances per thickness and application. Specifications should state the following key required AS standards:
- All glass in general to comply with AS 1288.
- All Safety Glass to also comply with AS/NZS 2208.
ComfortPlus™ coatings are designed for surface #4 in single glazed laminated application. This means that the coating can be touched from the interior of the building. Care in cleaning and handling guidelines to be adhered too – see Cleaning and Handling guideline here.
See cross section diagrams below:
Performance Data
| AGGLam® Energy - ComfortPlus™ Clear | Colour | VLT% | VLR-Out% | VLR-In% | UV-Block% | U-Value | SHGC | Selectivity |
|---|---|---|---|---|---|---|---|---|
| 6.38mm ComfortPlus Clear Laminate | Clear | 82 | 10 | 11 | >99 | 3.6 | 0.69 | 1.19 |
| AGGLam® Energy - ComfortPlus™ Neutral | Colour | VLT% | VLR-Out% | VLR-In% | UV-Block% | U-Value | SHGC | Selectivity |
|---|---|---|---|---|---|---|---|---|
| 6.38mm ComfortPlus Neutral Laminate | Neutral | 59 | 7 | 9 | >99 | 3.6 | 0.52 | 1.13 |
